QuillHubQuillHub
RU

SRT file generator: free subtitles from video

Upload a video or audio file, and QuillHub turns the speech into an SRT file: numbered subtitles with start and end times, ready for YouTube, VLC, or your editor. No typing timecodes by hand.

20,000+hours transcribed

60 free minutes when you sign up · No card required

  • YouTube
  • Google Drive
  • Direct file link
  • Files MP4, MOV, MKV, AVI, WEBM, MP3, WAV, M4A

Sample

This transcript became a 45-line SRT file for a 3-minute NASA video

Real QuillHub output with no manual edits: 3 minutes 17 seconds of recording, punctuation and paragraphs added automatically, with timestamps in the text. Above the text: chapters and a summary. Switch the tabs to see each layer.

NASA Glenn Rover Tire Testing — Heather Oravac00:00 / 3:17 · Heather OravecReady · 4 documents
  • Heather Oravec0:15

    Working at NASA meant that I could use my creativity and design process that I really enjoyed doing to think outside of the box while still doing engineering.

  • Heather Oravec1:13

    How important are the tires on your car? The tires on your car go flat, you're not getting very far. So if we send a rover up to the Moon and our tires fail, there's nobody up there that can fix it. Essentially, that mission is over.

  • Heather Oravec2:13

    And as we're driving the rovers, we're taking all sorts of different data and evaluating the performance of the tires. For testing tires, a typical day is actually pretty routine.

3 more paragraphs, each with a timestamp; click a timestamp to jump the audio there

Continuous speech, now readable text

Basic speech recognition returns a stream of words with no periods or paragraphs. Here the punctuation is in place, the text is split into paragraphs, and each one has a timestamp, so you can read it instead of transcribing it again.

  • Punctuation and paragraphs added automatically
  • Export to TXT, DOCX, SRT, and VTT
  • 0:13Working at NASA: Rover Tire Development and Motivation2 min
  • 1:46The Slope Lab: Facility and Tire Testing Methods1 min
  • 2:50Advice for Students: Opportunities in STEM1 min

Each chapter has its own timestamp and length

The whole 3 minutes 17 seconds at a glance

Chapters follow the meaning, not the pauses, so you can see what each part of the recording covers and jump to the one you need.

  • 3 chapters across 3 minutes 17 seconds
  • Each chapter links to its place in the recording

Heather Oravac, a research engineer at NASA Glenn Research Center, describes her work developing and testing tires for lunar and planetary rovers in the Slope Lab.

  • Tire reliability is critical for the success of lunar and planetary rover missions.
  • Future missions require vehicles capable of driving thousands of miles and lasting up to ten years.
  • The Slope Lab enables realistic testing using full-size rovers and lunar soil simulants on a tilting bed.

What the AI pulled out

  • Work involves applying creativity and engineering to real missions (Moon, Mars).01
  • Testing uses full-size roving vehicles on actual lunar soil simulants in a unique indoor facility.02
  • Data-driven comparisons guide tire design improvements.03
  • Emphasis on long-duration goals: vehicles driving thousands of miles and lasting up to 10 years.04
  • Advice to students: explore STEM, learn broadly, and follow interests.05

No need to replay 3 minutes 17 seconds

The summary is built from the broadcast itself: key ideas, numbers and the decisions that were actually announced. It can go into a team chat as it is.

  • 5 main ideas from the recording
  • 5 key points in the full summary
One-page digest

Systematic testing and data comparison reveal which tire design features work and which need improvement.

from the recording
Article draft

“NASA Glenn Rover Tire Testing — Heather Oravac”: rover tires, lunar testing, NASA Glenn

from the recording
Follow-up email

What was discussed, what was decided, what happens next

template
Task list

Who does what next — the tasks from the recording as one list

template
Ask the recording

“Create a checklist for rover tire testing based on Heather's workflow”: the chat answers from the text and gives the timestamp

chat
Your own prompt

A CRM note, a post, talking points — or any format you need

anything
  • Rover
  • Lunar soil simulant
  • Slope Lab
  • Test rig / test fixtures
  • Reinvention of the wheel

Every AI action is included in the Unlimited plan — no credits per click.

Finished documents on top of the text

The transcript is only the start. From one recording you can build a digest, an article draft or an email — or describe a format of your own.

  • Ready-made templates and your own prompts
  • Chat over the recording: ask anything about the text
  • 5 terms with definitions
Upload your recordingSee the full example(opens in a new tab)60 free minutes when you sign up · No card required

Example: “Surprisingly STEM: Space Tire Engineer,” NASA Glenn Research Center, NASA Image and Video Library, license public domain (U.S. government work). Transcript, chapters, summary and key points by QuillHub.

How it works

How to create an SRT file from a video

Three steps in your browser. No software to install and no timecodes to type.

  1. 1

    Add your video or audio

    Drag the file into the form: MP4, MOV, MKV, AVI, WEBM, MP3, WAV, M4A, and other formats, up to 10 hours and 5 GB. You can also paste a YouTube or Google Drive link.

  2. 2

    Wait for the speech recognition

    QuillHub recognizes the speech, adds punctuation, and ties every phrase to the time it was said. The 3-minute NASA video in the sample was ready in under a minute.

  3. 3

    Download the SRT

    Open the recording, click Export, and choose Subtitles (.srt). The same menu has Subtitles (.vtt) for web players, plus DOCX, TXT, and Markdown if you need a document instead.

What's inside the file

What an SRT file from QuillHub looks like

SRT (SubRip Subtitle) is a plain text file with the .srt extension. Here is what's inside the SRT made from the NASA video in the sample above.

Subtitle number

Each block starts with a sequence number: 1, 2, 3, and so on. Players read the blocks in this order. The 3-minute video produced 45 of them.

Start and end time

The second line holds the display time, for example 00:00:15,776 --> 00:00:19,788: hours, minutes, seconds, and milliseconds after a comma, with an arrow between start and end.

One line of text

Then comes the spoken phrase, one line per subtitle. In the sample, a subtitle stays on screen for 3.5 seconds and holds 59 characters on average; the longest has 87.

A blank line between blocks

Blocks are separated by an empty line. Delete it while editing, and a player may merge two subtitles into one or reject the file.

UTF-8 encoding

The file is saved in UTF-8 without a byte order mark, which is the encoding YouTube asks for. Accented letters and non-Latin scripts display correctly.

No styling and no speaker names

SRT carries text and timing only: no fonts, colors, or positions. QuillHub doesn't write speaker names into it either, so the file stays clean for players that show it as is.

AI on top of the transcript

An SRT file, then answers from the video

The speech behind your subtitles is also a searchable transcript. Ask the chat about the video and get the answer with the moment it was said.

Product demo video · 1 speaker12:40
Where does the demo show the export settings?

At 7:15 she opens the settings panel and switches the format before exporting. The step before that is choosing the project folder.

Product demo · 07:15 — the fragment is lit on the track
Which of my tutorials mention keyboard shortcuts?

Three of them: the editing basics video, the color video, and the export walkthrough, each with the timestamp where shortcuts come up.

8 tutorials in the archive
tutorial 2 · editing basics
tutorial 6 · export walkthrough
01

Ask across all your videos

Ask the chat about every recording in your archive at once and find the right clip by what was said in it.

02

Summary, tasks, blog post

One click for a summary, a follow-up email, a task list, or a blog post draft from the video. Or write your own prompt.

03

Access for your AI agents

The MCP server lets Claude and other AI agents fetch your transcripts and SRT files directly.

Every AI action is included in the Unlimited plan — no credits per click.

Ways to do it

Four ways to get an SRT file for a video

An SRT file is just text, so you can write one by hand. The question is how much of the timing you want to do yourself.

OptionHow the text gets inTimingLimitsGood for
QuillHubSpeech recognition from the video or audio file, or from a YouTube linkSet automatically for every subtitle, down to milliseconds60 free minutes, files up to 10 hours and 5 GBAny video or podcast where you need the file itself, plus a transcript and summary
YouTube StudioAutomatic captions, or you paste a transcript and choose Without timingYouTube syncs the text to your videoOnly for videos uploaded to your channelCaptions that stay on YouTube
Subtitle editorYou type each line while the video playsYou set start and end for every lineYour time, line by lineFine-tuning a file that's already close
Text editorYou write number, timecode, and text by hand in Notepad or TextEditYou type every timecodeSave as plain text in UTF-8 with the .srt extensionA clip with a handful of lines

What people make SRT files for

SRT is the format most video platforms and editors accept, so the same file serves many jobs.

YouTube videos

Upload the SRT in YouTube Studio with timing, and viewers get accurate captions instead of auto-generated ones.

Course lessons

Add an SRT next to each lesson video on course platforms that accept subtitle files, and students can read along.

Video editing projects

Import the SRT into your editor as a caption track, then adjust the look there before export.

Podcasts with a video version

A podcast episode on YouTube or a social platform gets subtitles from the same recording you already have.

Webinars and lectures

A recorded webinar gets subtitles for the replay page, and the transcript and chapters come with it.

Accessibility

Captions help viewers who are deaf or hard of hearing and anyone watching with the sound off.

Who it's for

Who uses an SRT generator the most

The more videos go out each week, the more hours the file saves.

Video creators

Subtitles for every upload

Drop in the final cut and get an SRT for YouTube in minutes. The file is yours: upload it to YouTube, keep it with the project, or reuse it in your editor.

  • SRT and VTT for every video
  • Fix a misheard name once with Find and replace
  • Burned-in captions for Shorts and Reels in Video captions
QuillHub for media

Educators and course authors

Captions for a whole course

Upload a batch of lesson videos at once and download an SRT for each. The transcript and chapters double as lesson notes.

  • Several files in one upload
  • Chapters with timestamps for each lesson
  • Text export for handouts in DOCX

Podcasters

Subtitles for the video version

The episode you already recorded gives you a transcript, show notes with chapters, and an SRT file for the video edit.

  • SRT from an audio-only MP3 or WAV
  • Chapters with timestamps for show notes
  • Blog post draft in the AI chat
QuillHub for podcasters

Marketing teams

Product videos in other languages

Get the original SRT, then translate the transcript into up to five languages and download a subtitle file for each.

  • Translation into 11 languages, no extra minutes
  • A separate SRT for every language
  • Share links that open without an account
QuillHub for product teams

Tips

How to add an SRT file to a video and keep it accurate

QuillHub generates the file from speech; it doesn't take an existing .srt as input. Here is what to do with the file once you have it.

  • Upload it to YouTube with timing

    In YouTube Studio, open Subtitles, pick the video and language, choose Upload file, then With timing. YouTube accepts basic SRT in plain UTF-8, which is what QuillHub saves.

  • Play it in VLC

    Give the SRT the same name as the video and put both in one folder. VLC loads the subtitles automatically when you open the video.

  • Keep it as a track in MKV

    Matroska stores SRT as a subtitle track that viewers can switch on and off. A muxing tool such as mkvmerge adds the file to the video as a separate track.

  • Burn captions into MP4

    For Shorts, Reels, and TikTok, where a separate file won't show, use Video captions: upload a clip up to 10 minutes, pick a style, and export MP4 with the captions on the picture. Japanese, Chinese, and Korean are not supported there yet.

  • Fix a misheard name once

    In the sample, the speaker's surname came out as Oravac instead of Oravec. Open Edit text, use Find and replace, and the next SRT download picks up the corrected text.

  • Set the language for heavy accents

    The language is detected automatically, one per recording. If the speech has a strong accent, choose it under Audio Language before you start.

Without the website

SRT files in Telegram

If you use Telegram, you can also send a video to @QuillAI_Bot. It is the same service, and once you link Telegram to your account, the recordings from the bot show up in the web app, where you can download the SRT.

Open @QuillAI_Bot
  • Send the video from any chat or from your phone
  • Minutes and plan are shared with the website after you link Telegram
  • SRT and VTT are in the Export menu of each recording

Pricing

The more you record, the cheaper the hour

Start free, pay only when you need more.

Our lowest price
Unlimited

from$6.66per month

Six months of unlimited — $39.99 up front. Minutes are not counted at all.

Get Unlimited

Six months — $39.99, billed once.

What $6.66 a month works out to

10 hours$0.67/hr
20 hours$0.33/hr
50 hours$0.13/hr

The same $6.66 in one-off packs buys about 500 minutes — roughly eight hours. Then they run out; Unlimited doesn’t.

Month by month the same half-year would cost $59.94 — a $19.95 difference.

One-off minute packs
from $2.99
Not a subscription. Minutes never expire and stack with your balance.
150 minutes — $2.99350 minutes — $4.99750 minutes — $9.992,950 minutes — $29.99

The minute gets cheaper with volume: from $0.020 in the smallest pack to $0.010 in the largest.

Start
$0
60 minutes when you sign up
  • 60 minutes to try, they don't expire
  • All languages and speaker recognition
  • Export to a document
  • No card required
Get started
Team

A shared workspace, projects and roles. Invoice billing and paperwork for companies.

$14.99per seat, per month
Start a team

FAQ

SRT generator: frequently asked questions

If your question isn't here, contact support.

An SRT file (SubRip Subtitle, .srt) is a plain text subtitle file. It holds numbered blocks, and each block has a start and end time and the text to show on screen during that time. Almost every video player, editor, and video platform can read it.

A speech recognition model turns the audio track into words and records when each one was said. QuillHub adds punctuation and groups the words into short subtitles with start and end times, then writes them in SRT and VTT. For recordings longer than three minutes, a language model also writes a summary, key points, and chapters on top of the transcript.

Yes. You get 60 free minutes when you sign up, and no card is required. That covers an hour of video or many short clips, and every recording comes with an SRT and a VTT. After that, minute packs start at $2.99, or Unlimited is $9.99 a month.

Each subtitle takes three parts: a number, a timecode line such as 00:00:15,776 --> 00:00:19,788, and one or more lines of text, followed by a blank line. Time uses hours, minutes, seconds, and milliseconds after a comma. The format has no styling: fonts and colors are set by the player or editor.

Any text editor opens it: Notepad on Windows, TextEdit on Mac. To watch it with the video, name the SRT the same as the video file and open the video in VLC. Video editors and YouTube Studio import it as a caption track.

On YouTube, upload it in YouTube Studio under Subtitles with Upload file and With timing. For a file on your computer, keep the SRT next to the video with the same name, or add it to an MKV as a subtitle track. For social clips where viewers won't turn on a separate file, Video captions in QuillHub burns captions from the video's speech into an MP4.

Yes, in two ways. For any recording, Edit text with Find and replace corrects a word or name across the whole recording, and the SRT download uses the corrected text. For videos up to 10 minutes, the Video captions editor lets you change words, split and join phrases, and download SRT or VTT built from your edits.

No. QuillHub creates subtitles from speech, so the form takes video and audio files and links. To change a file you already have, open it in a text or subtitle editor. If you still have the video, upload it and you get a new SRT along with the transcript.

Both are plain text with timed blocks. VTT (WebVTT) starts with a WEBVTT header, uses a period before milliseconds, and is the format browsers use for video on websites. SRT uses a comma and is the most widely accepted by players and editors. QuillHub gives you both for every recording.

Timing comes from the speech recognition itself, so each subtitle starts when the words are said. In the sample, subtitles last about 3.5 seconds each. A subtitle can end mid-sentence and continue in the next one, the way automatic captions usually split long phrases.

Yes. Paste the link into the Paste Link tab and QuillHub builds the SRT from the video's audio, including videos that have no subtitles. Some public videos still can't be downloaded; in that case, upload the file.

Speech is recognized in 98+ languages, one language per recording. The Translate button in the recording window translates the transcript into one of 11 languages, and you can download an SRT for each translation. Translation doesn't use up minutes, but it needs minutes on your balance or an active plan.

Only you, and anyone you send a share link to. Share links are off until you turn them on. Files and transcripts are encrypted in transit and at rest.

Your data

What happens to your recordings

Doctor's appointments, legal consultations and therapy sessions go through QuillHub. That is why we say this plainly instead of burying it in the terms.

Who processes your data

Encryption — files and transcripts are encrypted in transit and at rest, and only you and the people you share a link with have access.

Never used for training — recordings are not used to train models and are not passed to third parties.

Delete anytime — a recording can be deleted at any moment, together with its transcript and everything derived from it.

Transparent subprocessors — the list of services involved in processing is published on its own page.

Generate your SRT file for free

60 minutes when you sign up, no card required. Upload a video, and the subtitles are ready in a few minutes.